null

PA800: 54mm Toy Soldiers on Parade Moulds

(6 reviews) Write a Review

Options

€51.83
Inc. Sales Tax
€42.14
Ex. Sales Tax
Or

Info

SKU:PA800 ,UPC: ,Condition: ,Weight: ,Shipping:

Info

SKU:
PA800
UPC:
0735930008009
Condition:
New
Weight:
0.68 KGS
Shipping:
Calculated at Checkout

Specifications

Commodity Manufacturer Country, Commodity Code, Commodity Description,

Specifications

Commodity Manufacturer Country:
IE
Commodity Code:
82060000
Commodity Description:
Hobby Casting Moulds

Description

Contains 3 vulcanised black rubber moulds to cast 24 different types of 54mm Toy Soldiers both marching and at attention. Contains a variety of heads for different regiments etc. You will require 75g of metal per figure. Venting guide photos should be used to help improve the moulds. You need a sharp knife or scalpel to cut the channels in the mould.

This kit has been designed so a large number of regiments can be produced from one kit. Four heads are supplied with the headdresses necessary to make many different regiments. Three styles of arms are supplied so as to make soldiers marching or standing at attention and an officer with a sword.

Traditional Toy Soldiers Master Tools

The tools above are arranged in the approximate groupings to make the three moulds. The left hand two tools are the soldier standing to attention with an right hand arm with rifle and an officers sword and left arm. The middle two tools are a soldier walking and a right hand arm and an arm holding an officer's sword. The right tool contains four heads as to fit either a walking or standing soldier.

Suggested colours for painting these figures:
  • AV909 - Vermillion.
  • AV965 - Prussian Blue.
  • AV951 - White.
  • AV950 - Black.
  • AV928 - Light Flesh.
  • AV510 - Gloss Varnish.
Bearskin

This is the headdress of the five Foot Guard Regiments. All wear the black bearskin cap: the scarlet tunic has a dark blue collar, epaulettes piped in white, and cuffs of dark blue and white; the dark blue trousers has a red stripe down the seam of each leg and a white leather buff belt completes the uniform. The belt buckle is gilt as are the buttons and chain chin strap. The officer’s uniforms have a crimson or gold sash, which replaces the white belt. The tunic collars, epaulettes and cuffs are dark blue with gold embroidery; the stripe down the seams of the trousers is wider than other ranks. Officers have gold embroidery on the skirts and sleeve flaps of their tunics.

  • Grenadier Guards.
    Grenadier Guards wear the tunic and cuff buttons evenly spaced - eight on the tunic and four on each sleeve. The bearskin has a white plume on the left-hand side. Another feature is the ‘grenade fired proper’ on the tunic collars
  • Coldstream Guards.
    Coldstream Guards wear the tunic and cuff buttons in pairs - ten on the tunic 2-2-2-1, the last button is under the belt, and four on each sleeve. The bearskin has a red plume on the right-hand side. A garter star is on the collar.
  • Scots Guards.
    Scots Guards have tunic and cuff buttons in threes - nine on the tunic 3-3-2, the last button is under the belt, and three on each sleeve. There is no plume on the bearskin. The collar badge is the thistle
  • Irish Guards.
    Irish Guards have tunic and collar buttons in fours - eight on the tunic 4-4 and four on each sleeve. The bearskin has a blue plume on the right-hand side. The collar badge is the shamrock, white for other ranks and silver for officers
  • Welsh Guards.
    Welsh Guards have buttons in fives - ten on the tunic 5-5 and five on each sleeve. The bearskin has a white/green/white plume on the left-hand side. The collar badge is a leek.
Home Service Helmet

This is the helmet with the spike on the top and was issued to the Infantry of the Line in 1878. It was worn just prior to World War 1 when the red jacket for the normal soldier, other than dress disappeared. It is still worn on dress occasions by some regiments. This helmet was used by all regiments in the British Army other than Guards, Fusiliers, Rifle and most Scottish Regiments.

Painting Line Infantry The jackets were red and the trousers were blue with a thin red stripe down the seams. The collars were blue for Royal regiments, White for English and Welsh regiments; Yellow for Scottish regiments and Green for Irish regiments. The helmet was blue with the fittings (badge and spike) brass or bronze. The belt and webbing white. An interesting representation would be the Royal Irish Rifles who are normally portrayed wearing the small busby - 1881 and 1891 they wore the helmet. The whole outfit was dark green with the helmet fitting in dark bronze. The belt was black.

Another variation was the Army Service Corps of around 1890. The uniform was dark blue, with a white collar and cuffs and a white stripe down the seams of the trousers. The belt was white. The helmet was also dark blue with the fittings brass. Instead of a spike on the top of the helmet there was a ball.

  • Line Infantry 1878.
    The jackets were red and the trousers were blue with a thin red stripe down the seams. The collars were blue for Royal regiments, White for English and Welsh regiments; Yellow for Scottish regiments and Green for Irish regiments. The helmet was blue with the fittings (badge and spike) brass or bronze. The belt and webbing white.
  • Royal Irish Rifles 1881-1891.
    The Royal Irish Rifles who are normally portrayed wearing the small busby - 1881 and 1891 they wore the helmet. The whole outfit was dark green with the helmet fitting in dark bronze. The belt was black.
  • Army Svs. Corps. 1890.
    Army Service Corps of around 1890. The uniform was dark blue, with a white collar and cuffs and a white stripe down the seams of the trousers. The belt was white. The helmet was also dark blue with the fittings brass. Instead of a spike on the top of the helmet there was a ball.
Foreign Service Helmet

As the name signifies this helmet was used on service abroad, particularly in Egypt and India. The helmet was light and was coloured khaki. Although khaki was used in India as far back 1846 it took a while before it became general issue. One can still see paintings and drawings of the 1880s and 1890’s of the khaki helmet used with the red coat and blue trousers or khaki coat and blue trousers. There were no badges on this type of helmet. The belt and webbing could be either white or black for other ranks and brown for officers.

  • Northumberland Fusilers S. A. war.
    The helmet was light and was coloured khaki. Although khaki was used in India as far back 1846 it took a while before it became general issue. One can still see paintings and drawings of the 1880s and 1890’s of the khaki helmet used with the red coat and blue trousers or khaki coat and blue trousers. There were no badges on this type of helmet. The belt and webbing could be either white or black for other ranks and brown for officers.
Peak Cap

The Peak Cap was in general issue prior to World War 1 this headgear is still used today. The cap in the mould has a slightly rounded top which is the case with the stiffening removed. If a cap is required with the standard stiffening, a little filing will give you the standard peak cap.

Peak caps

This product is not suitable for children under the age of 14.

Frequently Bought Together:

PA800 Toy Soldiers on Parade Label
Inc. Sales Tax
Ex. Sales Tax

6 Reviews

View All
  • 5
    54mm toy soldiers on parade moulds

    Good quality. simple to use. good instruction. Prompt delivery.

  • 3
    Compatibility with PA802 & PA803

    The product as a standalone is fine. It works. The problem is with the compatibility of PA801 with the PA802 and PA803 sets. The arm sockets on the marching soldiers are too small to allow the instruments to get a reasonable surface to complete a solid bond for the glue. Filing the arm is difficult on the instruments. The Standing Soldier works perfectly well. The problem that I see, is that the shoulder sockets in PA800 are significantly smaller on the marching soldier than the standing soldier. This means that while the band instruments and arms from PA802 and PA803 fit the standing soldier with a little work, it is almost impossible to fit them to the marching soldier even with heavy filing. The heavy filing is impossible on the "Large and Small Brass" without damaging the instrument, and the flute and clarinet are too flimsy to allow major work.

6 Reviews

  • 5
    54mm toy soldiers on parade moulds

    Good quality. simple to use. good instruction. Prompt delivery.

  • 3
    Compatibility with PA802 & PA803

    The product as a standalone is fine. It works. The problem is with the compatibility of PA801 with the PA802 and PA803 sets. The arm sockets on the marching soldiers are too small to allow the instruments to get a reasonable surface to complete a solid bond for the glue. Filing the arm is difficult on the instruments. The Standing Soldier works perfectly well. The problem that I see, is that the shoulder sockets in PA800 are significantly smaller on the marching soldier than the standing soldier. This means that while the band instruments and arms from PA802 and PA803 fit the standing soldier with a little work, it is almost impossible to fit them to the marching soldier even with heavy filing. The heavy filing is impossible on the "Large and Small Brass" without damaging the instrument, and the flute and clarinet are too flimsy to allow major work.

  • 5
    making dad happy

    I bought this set along with the two instruments sets. My father wants a marching band of the grenadier guards. my first experience with these series, but I must say this is an amazing way to create a very good looking band, with the right toy soldier feel! Also easy to cast, and I'm even going to cast some for myself. Keep up the good work!!!

  • 5
    Exceptional quality!

    As with all the moulds I've purchased over the years this is once again a quality product.

  • 5
    1/32 or 54mm Parade soldiers

    I have dealt with the company for many years and find the products very good. The moulds are easy to use and give very good results.

  • 4
    1/32 or 54mm Parade Soldiers

    Moulds work well with fine pouring qualities and few casting problems. However the rifle on the one arm is very un-defined and looks more like a long stick. Its also difficult having to cast the rifle arm with a body each time. Would be much better with just an arms mould. But the set is good value for money and the selection of heads very useful. Finally the age old question, 1/32 or 54mm. Personally I think these figures are slightly small for 54mm but I know its still often a personal assessment.

Videos