Cast Seven Years' War semi-flat 40mm scale Prussian metal soldiers with interchangeable heads.
Difficulty Levels 1 to 5:
Casting Difficulty - 3
Assembly Difficulty - 4
Painting Difficulty - 3
Use 4 clamps instead of two (or use more elastic bands than normal). Space the clamps on the upper and lower quarters of each side of the mould when securing the mould. Venting should only be needed if you are not using Model Metal.
When venting you may need to drill a 1.5 mm hole through the mould at certain points. On the reverse side of the mould (the plain side) where the hole comes out you can add a channel upwards if you choose to, but as long as you have placed the rough side of the support board against the mould the air should be able to escape safely.
We recommend our scalpels because you need an extremely sharp blade to properly vent a mould. Our Gel Glue is very effective for assembling these figures.
Mould 3102 casts.
- NCO body, 3102/1
- NCO partisan, 3102/2
- Fusilier head, 3102/3
- Drummer body, 3102/4
- Grenadier head. 3102/5
Prussian Musketeer Assembly Guide (pdf).
Prussian Grenadier Assembly Guide (pdf).
Prussian Fusilier Assembly Guide (pdf).
Prussian History Guide (pdf).
Prussian Painting Guide (pdf).
Figures painted by Richard Hattersley.