PA3109 Seven Years War Russian Standard Bearer & Infantry Officer 40mm Mould

Cast Seven Years' War semi-flat 40mm scale Russian metal Standard Bearer and Infantry Officer with interchangeable heads.

Difficulty Levels 1 to 5:

• Casting Difficulty - 2
• Assembly Difficulty - 4
• Painting Difficulty - 3

Casting advice:

Use 4 clamps instead of two (or use more elastic bands than normal). Space the clamps on the upper and lower quarters of each side of the mould when securing the mould. Venting should only be needed if you are not using Model Metal.
When venting you may need to drill a 1.5 mm hole through the mould at certain points. On the reverse side of the mould (the plain side) where the hole comes out you can add a channel upwards if you choose to, but as long as you have placed the rough side of the support board against the mould the air should be able to escape safely.

We recommend our scalpels because you need an extremely sharp blade to properly vent a mould. 

Mould 3109 Russia: Officers - Winter uniform casts.

1. Officer body in Winter Uniform, 3109/1
2. Standard Bearer body in Winter Uniform, 3109/2
3. Officer sword, 3109/3
4. Officer musket, 3109/4
5. Musketeer head with curls head, 3109/5
6. Leib-grenadier head, 3109/6

PDF SECTION:

Russia: Assembly Guide (pdf).

Russia: History (pdf).

Russia: Infantry printable spare flags (pdf).

Russia: Infantry 3109 - 3110 - 3111 - 3112 Painting Guide (pdf).

Figures painted by Richard Hattersley.

This product is not suitable for children under the age of 14.