Cast Seven Years' War semi-flat 40mm scale French metal infantry officer and drummer with interchangeable heads.
Difficulty Levels 1 to 5:
Casting advice:
Use 4 clamps instead of two (or use more elastic bands than normal). Space the clamps on the upper and lower quarters of each side of the mould when securing the mould. Venting should only be needed if you are not using Model Metal.
When venting you may need to drill a 1.5 mm hole through the mould at certain points. On the reverse side of the mould (the plain side) where the hole comes out you can add a channel upwards if you choose to, but as long as you have placed the rough side of the support board against the mould the air should be able to escape safely.
We recommend our scalpels because you need an extremely sharp blade to properly vent a mould.
Mould 3115 France: Infantry Officer and Drummer casts.
PDF SECTION:
France: Assembly Guide (pdf).
France: History (pdf).
France: Infantry printable spare flags (pdf).
France: Infantry 3113 - 3114 - 3115 - 3116 Painting Guide (pdf).
Figures painted by Richard Hattersley.
Note: Photos of painted figures may not represent castings exactly due to modifications during manufacturing.
This product is not suitable for children under the age of 14.
It was the first truly international war that changed the cour...
This is one of the 80-1 54mm Napoleonic moulds. There are some...
Sorry about the delay I went home to visit family. Also, than...
The art of hobby casting can require venting of our rubber mou...
A classic-looking ‘toy solider’-style wargame using metal 40mm...