Cast Seven Years' War semi-flat 40mm scale Prussian metal fusiliers and guards with interchangeable heads.
Difficulty Levels 1 to 5:
Casting Difficulty - 3
Assembly Difficulty - 4
Painting Difficulty - 3
Use 4 clamps instead of two (or use more elastic bands than normal). Space the clamps on the upper and lower quarters of each side of the mould when securing the mould. Venting should only be needed if you are not using Model Metal.
When venting you may need to drill a 1.5 mm hole through the mould at certain points. On the reverse side of the mould (the plain side) where the hole comes out you can add a channel upwards if you choose to, but as long as you have placed the rough side of the support board against the mould the air should be able to escape safely.
Mould 3104 casts.
Prussian 3104 Assembly Guide (pdf).
Prussian Flag Painting Guide (pdf).
Prussian History Guide (pdf).
Figures painted by Richard Hattersley.
This is one of the 80-1 54mm Napoleonic moulds. There are some...
Sorry about the delay I went home to visit family. Also, than...
The art of hobby casting can require venting of our rubber mou...